Removal and Replacement

REPLACEMENT

HINT:
- Installation is in the reverse order of the removal. But, the installation is indicated only when it has a point.
- In the LH side, work in the same procedure as in the RH side.




1. REMOVE BACK DOOR STAY ASSEMBLY LH
a. Remove the 4 bolts and back door stay from the back door panel.

HINT: While supporting the back door by hand, remove the back door stay.

2. INSTALL BACK DOOR STAY ASSEMBLY LH
a. Install the back door stay with the 4 bolts.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)