Display Check Mode

Display Check Mode:

DISPLAY CHECK MODE













A. DISPLAY CHECK MODE

HINT: In Display Check Mode, above checks can be performed.










B. Display Color Bar Check
1. Start the Diagnosis System.
2. Select "MENU".
3. Select "Display Check".
4. Select "Color Bar Check".
5. Make sure that each color name is corresponding to each color on the bar.

HINT: Select Black, Red, Green, Blue, White and Stripe to display selected colors and stripe on the entire screen.

6. Compare with the Color Bar Check in the Navigation Check and make sure that no difference is found.










C. Display Touch Switch Check
1. Start the Diagnosis system.
2. Select "MENU".
3. Select "Display Check".
4. Select "Touch Switch Check".
5. Touch the screen and make sure that every line reacts to the touch.

HINT: After the Touch Switch Check for vertical lines, press "Next" to check horizontal lines.










D. Display Panel Switch Check
1. Start the Diagnosis system.
2. Select "MENU".
3. Select "Display Check".
4. Select "Panel Switch Check".
5. Press each switch and make sure that it corresponds to the display on the screen.










E. Display Vehicle Signal Check
1. Start the Diagnosis system.
2. Select "MENU".
3. Select "Display Check".
4. Select "Vehicle Signal Check".
5. Check the status of the vehicle signal (PKB, SPEED, TAIL, REV) loaded into the display.


HINT: Vehicle signal data is updated every 1 second.