Dome Relay Cut Operation Check
DOME RELAY CUT OPERATION CHECKa. Remove the ignition key and close all doors.
b. Open the driver door to light the room light, and leave it as opened. Check that the light goes off in about 30 min.
c. After the room light goes off, close the driver door.
d. Open any door except the driver's door to turn the room light on, and then open the driver's door. Check that room light goes off within 30 min. after opening the driver's door.
e. Close all the doors. With the ignition key inserted, open any door to light the room light, and then, remove the ignition key. Check that the room light goes off within 30 min.
f. One of the room lamp switch is on and close all doors.
g. Lock all doors, and check that the room light goes off within 3 sec.