Pre-Check

DATA LIST

DATA LIST:

HINT: According to the DATA LIST displayed by the hand-held tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the DATA LIST as a first step of troubleshooting is one of the method to shorten the labor time.

a. Connect the hand-held tester to DLC3.
b. Turn the ignition switch to ON.
c. According to the display on the tester, read the "DATA LIST".




ACTIVE TEST

ACTIVE TEST:

HINT: Performing the ACTIVE TEST using the hand-held tester allows the relay, VSV, actuator and so on to operate without parts removal. Performing the ACTIVE TEST as a first step of troubleshooting is one of the method to shorten the labor time.

It is possible to display the DATA LIST during the ACTIVE TEST.

a. Connect the hand-held tester to DLC3.
b. Turn the ignition switch to ON.
c. According to the display on the tester, perform the "ACTIVE TEST"