SRS Warning Light (Always Lights Up W/Ignition in ACC or Lock)

SRS Warning Light Circuit Malfunction (Always Light Up, When Ignition Switch Is Lock Position.)

CIRCUIT DESCRIPTION

The SRS warning light is located on the combination meter.

When the SRS is normal, the SRS warning light lights up for approx. 6 seconds after the ignition switch is turned from the LOCK position to ON position, and then turns off automatically.

If there is a malfunction in the SRS, the SRS warning light lights up to inform the driver of an abnormality. When the terminal TC and terminal CG of the DLC3 are connected, the DTC is displayed by blinking the SRS warning light.

The airbag warning light on the combination meter assy stays when;
- The fitting of the connector of the airbag sensor assy center is incomplete
- The wire harness between the airbag sensor assy center and the combination meter assy has a short with B+
- The combination meter assy malfunctions

Wiring Diagram:

Step 1 - 3:

Step 4 - 5:

INSPECTION PROCEDURE