Connecting Rod, Engine

Connecting rod cap x Connecting rod
1st 25 Nm (250 kgf-cm, 18 ft. lbs.)
2nd Turn 90° (Turn 90°, Turn 90°)
Thrust clearance
Standard 0.160 - 0.362 mm (0.0063 - 0.0143 inch)
Maximum 0.362 mm (0.0143 inch)
Oil clearance
Standard 0.024 - 0.048 mm (0.0009 - 0.0019 inch)
Maximum 0.08 mm (0.0031 inch)
Bushing inside diameter 22.005 - 22.014 mm (0.8663 - 0.8667 inch)
Oil clearance
Standard 0.001 - 0.007 mm (0.00004 - 0.00028 inch)
Maximum 0.010 mm (0.0020 inch)
Out-of-alignment Maximum per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Rod twist Maximum per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)
Connecting rod bolt
Diameter
Standard 7.2 - 7.3 mm (0.283 - 0.287 inch)
Minimum 7.0 mm (0.276 inch)