Troubleshooting
DTC P0560 SYSTEM VOLTAGECIRCUIT DESCRIPTION
DTC Detecting Condition:
Battery positive voltage is supplied to terminal BATT of the ECM even when the ignition switch is OFF for use by the DTCs memory and air-fuel ratio adaptive control value memory, etc.
HINT: If DTC P0560 appears, the ECM does not store another DTC.
Wiring Diagram:
Step 1 - 2:
INSPECTION PROCEDURE
HINT: Read freeze frame data using the hand-held tester or the OBD II scan tool, as freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, this is useful for determining whether the vehicle was running or stopped, the engine was warmed up or not, the air-fuel ratio was lean or rich, etc. at the time of the malfunction.