Rust Resistant
Rust-Resistant Body1. General
Rust-resistant performance is enhanced by extensive use of anti-corrosion sheet steel, as well as by an anti-corrosion treatment which includes the application of wax, sealer and anti-chipping paint to easily corroded parts such as the hood, doors and rocker panels.
2. Anti-Corrosion Sheet Steel
Anti-corrosion sheet steel is used in all areas other than the roof and interior parts.
3. Wax and Sealer
Wax and sealer are applied to the hemmed portions of the hood, door panels and back door to improve rust protection.
4. Under Coat
Formed PVC (Polyvinyl Chloride) coating is applied to the under side of the body. A thick coating to improve rust resistant performance is applied to the front and rear wheel houses, the fender apron and other parts which are subject to damage by stone chipping.
5. Anti-Chipping Application
Anti-chipping paint and PVC chipping primer are applied to the lower door panel area, wheel arch and the rocker panel area to protect them from being damaged by stone chipping. In addition, soft-chip primer is applied to the hood.