Component Tests and General Diagnostics
WHEEL AND TIRE SYSTEMINSPECTION
1. INSPECT TIRE
a. Check the tires for wear and proper inflation pressure.
Cold tire inflation pressure
b. Using a dial indicator, check the tire runout.
Tire runout: 1.4 mm (0.055 inch) or less
2. ROTATE TIRE
HINT: See the illustration for where to rotate each tire when you include the spare tire in the rotation and when you do not.
3. INSPECT BEARING BACKLASH
4. INSPECT BEARING BACKLASH
5. INSPECT AXLE HUB DEVIATION
6. INSPECT AXLE HUB DEVIATION
7. INSPECT WHEEL BALANCE
a. Check and adjust the Off-the-car balance.
b. If necessary, check and adjust the On-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lb) or less