Cylinder Block Assembly: Specifications

Cylinder block side cover (2WD) x Cylinder block 9.0 Nm (92 kgf-cm, 80 inch lbs.)

Cylinder block side cover drain cock plug (2WD) x Cylinder block side cover 7.0 Nm (71 kgf-cm, 62 inch lbs.)

Cylinder block w/head straight screw No.1 plug x Cylinder block 30 Nm (306 kgf-cm, 22 ft. lbs.)

Cylinder block w/head straight screw No.2 plug x Cylinder block 50 Nm (510 kgf-cm, 37 ft. lbs.)

Cylinder block w/head straight screw No.3 plug x Cylinder block 30 Nm (306 kgf-cm, 22 ft. lbs.)

Cylinder block water drain cock sub-assy x Cylinder block 39 Nm (398 kgf-cm, 29 ft. lbs.)

Cylinder block warpage Maximum 0.05 mm (0.0020 inch)

Cylinder bore diameter
Standard 87.500 - 87.512 mm (3.4449 - 3.4453 inch)
Maximum 87.52 mm (3.4457 inch)

Crankshaft Pulley
Torque 215 Nm (2,192 kgf-cm, 159 ft. lbs.)

Main bearing cap x Cylinder block





12 pointed head
1st 22 Nm (224 kgf-cm, 16 ft. lbs.)
2nd Turn 90°





6 pointed head 27 Nm (275 kgf-cm, 20 ft. lbs.)