Component Tests and General Diagnostics

INSPECTION







1. INSPECT POWER SLIDE DOOR MAIN SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







2. INSPECT POWER SLIDE DOOR RH SIDE CONTROL FRONT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







3. INSPECT POWER SLIDE DOOR LH SIDE CONTROL FRONT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







4. INSPECT POWER SLIDE DOOR CONTROL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.




5. INSPECT SLIDE DOOR LOCK RELEASE ACTUATOR OPERATION
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, and check the door lock release link moves to release position.







6. INSPECT LATCH SWITCH CONTINUITY
If continuity is not as specified, replace the switch.




7. INSPECT FUEL LID COURTESY SWITCH CONTINUITY
a. Check that continuity exists between terminal 1 and terminal 2 with the switch ON (switch pin pushed).
b. Check that no continuity exists between terminal and terminal 2 with the switch OFF (switch pin replaced).
If continuity is not as specified, replace the switch.