Rear No.2 Seat
DISASSEMBLY1. REMOVE RELEASE HANDLE
2. REMOVE REAR SEAT CUSHION UNDER COVER
3. REMOVE SEAT RECLINING COVERS
4. REMOVE SEAT RECLINING ADJUSTERS
a. Remove the 4 bolts from the seat cushion assembly.
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
b. Remove the 4 bolts and reclining adjusters from the seatback assembly.
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
5. REMOVE SEATBACK COVER
a. Pull off the reclining connecting pipe from the seatback assembly.
b. Remove the headrest.
c. Remove the 2 clips and seatback board.
d. Remove the headrest supports.
e. Remove the seatback frame.
f. Remove the seatback cover from the seatback pad.
6. REMOVE SEAT LEG COVERS
a. Remove the 4 screws and seat leg cover.
b. Employ the same manner described above to the other side.
7. REMOVE SEAT ADJUSTER ASSEMBLY
Remove the 4 bolts and seat adjuster assembly.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
8. REMOVE SEAT CUSHION COVER
a. Remove the seat cushion frame.
b. Remove the seat cushion cover from the seat cushion pad.
9. REMOVE REAR NO. 2 INNER BELT
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
10. REMOVE REMOVE LEVER
11. REMOVE SEAT TRACK LOWER RAIL PROTECTOR
12. REMOVE SEAT TRACK HANDLE
REASSEMBLY
Reassembly is in the reverse order of disassembly.