System Inspection
INSPECTION1. INSPECT FRONT POWER SEAT SWITCH LH
(a) Check the resistance between the terminals when each switch is operated.
Standard:
Slide Switch:
Front Vertical Switch:
Rear Vertical Switch:
Reclining Switch:
If the result is not as specified replace the switch.
2. INSPECT FRONT POWER SEAT SWITCH RH
(a) Check the resistance between the terminals when each switch is operated.
Standard:
Slide Switch:
Reclining Switch:
If the result is not as specified replace the switch.
3. INSPECT POWER SEAT SWITCH ASSY (LUMBAR SUPPORT)
(a) Only on the driver side:
Check the resistance between the terminals when the switch is operated.
Standard:
If the result is not as specified replace the switch assy.
4. INSPECT FRONT SEAT ADJUSTER ASSY
(a) Check operation of the slide motor.
(1) Check if the motor rotates smoothly when the battery is connected to the slide motor connector terminals.
Standard:
If the result is not as specified replace the slide motor.
(b) Only on the driver side:
Check operation of the vertical motor.
(1) Check if the motor rotates smoothly when the battery is connected to the vertical motor connector terminals.
Standard:
If the result is not as specified replace the vertical motor.
(c) Only on the driver side:
Check operation of the rear vertical motor.
(1) Check if the motor rotates smoothly when the battery is connected to the rear vertical motor connector terminals.
Standard:
If the result is not as specified replace the lifter motor.
(d) Check operation of the reclining motor.
(1) Check if the motor rotates smoothly when the battery is connected to the reclining motor connector terminals.
Standard:
If the result is not as specified replace the reclining motor.
5. INSPECT LUMBAR SUPPORT ADJUSTER ASSY
(a) Only on the driver side:
Check operation of the lumbar support adjuster motor.
(1) Check if the motor rotates smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.
Standard:
If the result is not as specified replace the adjuster motor.