Cylinder Head Assembly: Specifications

Cylinder Head Bolts (Recessed Head)
Step 1 36 Nm (367 kgf-cm, 27 ft.lb)
Step 2 Turn 180°





Cylinder Head Bolts (14 mm Head) 30 Nm (306 kgf-cm, 22 ft.lb)

Cylinder Head Bolt Measurement
Standard outside diameter 10.85 - 11.00 mm (0.4272 - 0.433)
Minimum outside diameter 10.7 mm (0.421 inch)

If any cylinder head bolt is broken or deformed, replace it.

Intake Manifold Bolts 28 Nm (286 kgf-cm, 21 ft.lb)
Exhaust Manifold Sub-Assy 30 Nm (306 kgf-cm, 22 ft.lb)








Camshaft Bearing Cap Bolts
10 mm Head 9.0 Nm (92 kgf-cm, 80 in.lb)
12 mm Head 24 Nm (245 kgf-cm, 18 ft.lb)

Cylinder Head Maximum Warpage 0.10 mm (0.0039 in.)