On-Vehicle Inspection

ON-VEHICLE INSPECTION

1. INSPECT TURN SIGNAL FLASHER CIRCUIT
(w/o: Daytime Running Light)







a. Measure voltage between terminals as shown in the chart below.




b. Connect the connector to the turn signal flasher, and turn the ignition switch to ON and inspect the wire harness side connector from the back side as shown in the chart.

2. INSPECT TURN SIGNAL FLASHER CIRCUIT
(w/: Daytime Running Light)







a. Measure voltage between terminals as shown in the chart.




b. Connect the connector to the turn signal flasher and turn the ignition switch to ON, and inspect the wire harness side connector from the back side as shown in the chart.







3. INSPECT TOWING CONVERTER RELAY
a. Measure voltage between terminals as shown in the chart below.