Traction Control Module: Service and Repair
SKID CONTROL ECU ASSYREPLACEMENT
1. REMOVE INSTRUMENT PANEL FINISH PLATE
2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
3. REMOVE INSTRUMENT PANEL LOWER LH
4. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSY
a. Remove the bolt and 2 nuts, then move the instrument panel junction block assy aside.
5. REMOVE SKID CONTROL ECU ASSY
a. Disconnect the 4 skid control ECU connectors.
b. Remove the 2 nuts and control ECU assy.
c. Disconnect the skid control buzzer connector and remove the skid control buzzer assy from skid control ECU assy.
6. INSTALL SKID CONTROL ECU ASSY
a. Install the skid control buzzer on the skid control ECU, and connect the skid control buzzer connector.
b. Install the skid control ECU assy with 2 nuts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
c. Connect the 4 skid control ECU connectors.
7. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSY
a. Install the instrument panel junction block assy with bolt and 2 nuts.
8. INSTALL INSTRUMENT PANEL LOWER LH
9. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
10. INSTALL INSTRUMENT PANEL FINISH PLATE
11. CHECK VSC SENSOR SIGNAL