ABS (Antilock Brake System)
DIAGNOSTIC TROUBLE CODE CHARTHINT:
- If a malfunction code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, turn to the table for the respective DTC No. in the DTC chart.
- When U0121/94, U0123/62, U0124/95 or U0126/63 are output, inspect and repair the trouble areas indicated by U0121/94, U0123/62, U0124/95 or U0126/63 first.
C0200/31 - C1238/38:
C1239/39 - U0124/95:
DTC chart of ABS:
*1, *2:
Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed.
- *1:
1. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.
- *2:
1. Keep the vehicle in a stationary condition for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
2. Drive the vehicle at a vehicle speed of 31 mph (50 km/h). Then depress the brake pedal strongly for about 3 seconds.
3. Repeat the operation 3 times or more and check that the ABS warning light goes off.
4. Clear the DTC.
HINT: In some cases, the hand-held tester cannot be used when ABS warning light remains on.
C1201/51 - U126/63:
DTC chart of VSC:
HINT: In some cases, the hand-held tester cannot be used when the VSC warning light remains on.
C1271/71 - C0371/71:
DTC of sensor check function: