Front Seat Airbag Assy

CAUTION: Be sure to perform the initialization of the occupant classification ECU if any of the following conditions occur. If the initialization is not performed, the SRS may not operate properly.
- The occupant classification ECU is replaced.
- Accessories (seatback tray, seat cover, etc.) are installed to the vehicle.
- The passenger seat is removed from the vehicle.
- Both the SRS warning light and passenger airbag ON/OFF indicator light ("OFF") come on.
- The vehicle is brought to the workshop for repair due to an accident or collision.




VEHICLE NOT INVOLVED IN COLLISION
a. Perform a diagnostic system check.
b. With the front seat airbag assy installed on the vehicle, perform a visual check including the following: Cuts, minute cracks or marked discoloration on the front seatback assy around the front seat airbag assy.




VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.
b. With the front seat airbag assy removed from the vehicle, perform a visual check including the following:
- Cuts, minute cracks or marked discoloration on the front seat airbag assy.
- Cracks or other damage to the wire harness or connector.