Courtesy Lamp: Testing and Inspection

ROOM LAMP ASSEMBLY NO.1
a. Inspect the room lamp assembly No.1 continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.








ROOM LAMP ASSEMBLY NO.2
a. Inspect the room lamp assembly No.2 continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.

COURTESY LAMP ASSEMBLY
a. Inspect the courtesy lamp assembly continuity.
1. Check that there is continuity between terminals when the switch is operated.

Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft Is not pressed): Continuity