Drive Belt: Service and Repair
FAN AND GENERATOR V BELTREPLACEMENT
1. REMOVE FAN AND GENERATOR V BELT
a. Loosen the belt tension by turning the belt tensioner counterclockwise, and then remove the drive belt.
HINT: The pulley bolt for the belt tensioner has left-hand thread.
2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY
a. Remove the V belt from the tensioner pulley. Then check that nothing gets caught the tensioner by turning it clockwise and counterclockwise.
b. When a malfunction exists, replace the tensioner.
3. INSTALL FAN AND GENERATOR V BELT
a. Set the V belt onto every parts except the idler pulley No.2, as shown in the illustration.
b. Loosen the V belt by turning the belt tensioner counterclockwise.
c. Set the V belt to the idler pulley No.2.
d. After installing a new belt, check that the mark is within the B range as shown in the illustration.