Crankshaft, Engine
CrankshaftMaximum circle runout 0.04 mm (0.0016 inch)
Using a micrometer, measure the diameter of each crankshaft journal and crank pin.
Crankshaft journal diameter 66.988 to 67.000 mm (2.6373 to 2.6378 inch)
Crank pin diameter 51.982 to 52.000 mm (2.0465 to 2.0472 inch)
Maximum taper and out-of-round 0.02 mm (0.0008 inch)
Crankshaft Bearing Cap Set Bolt
Standard diameter 10.760 to 10.970 mm (0.4236 to 0.4319 inch)
Minimum diameter 10.40 mm (0.4094 inch)
Crankshaft Thrust Clearance
Standard thrust clearance 0.020 to 0.220 mm (0.0008 to 0.0087 inch)
Maximum thrust clearance 0.30 mm (0.0118 inch)