Removal and Replacement

BACK DOOR DAMPER STAY SUB-ASSEMBLY LH

REPLACEMENT

HINT: On the RH side, use the same procedures as on the LH side.




1. REMOVE BACK DOOR DAMPER STAY SUB-ASSEMBLY LH
a. Remove the 2 bolt and damper stay from the door panel.

HINT: While supporting the hood by hand, remove the hood support.

b. Loosen the bolt and remove the damper stay from the vehicle body.

2. INSTALL BACK DOOR DAMPER STAY SUB-ASSEMBLY LH
a. Install the damper stay with the 3 bolts.

Torque:
19.5 N.m (200 kgf.cm, 14 ft.lbf) for door side
17.5 N.m (180 kgf.cm, 13 ft.lbf) for body side