Function of Passenger Airbag ON/OFF Indicator
FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR LIGHTa. Initial check.
1. Turn the ignition switch to the ON position.
2. The passenger airbag ON/OFF indicator light ("ON" and "OFF") comes on for approximately 4 seconds, then goes off for approximately 2 seconds.
3. Approximately 6 seconds after the ignition switch is turned to the ON position, the passenger airbag ON/OFF indicator light will be ON/OFF depending on the conditions listed.
HINT:
- If the front passenger seat condition and the indication by the passenger airbag ON/OFF indicator light differ from those shown in the table, and the SRS warning light is off, then the DTC is not output. If this occurs, perform troubleshooting of "Trouble in indicator of Passenger airbag ON/OFF indicator".
- The passenger airbag ON/OFF indicator light is based on the timing chart in order to check the indicator light circuit
- When the occupant classification system has trouble, both the SRS warning light and the passenger airbag OFF indicator light come on. In this case, check the DTCs in the supplemental restraint system first. Then troubleshoot the occupant classification system if DTC B1150/23 is indicated and troubleshoot the passenger airbag ON/OFF indicator light (supplemental restraint system) if DTC B1152/28 is detected.