Camshaft Position Sensor: Service and Repair
REPLACEMENT1. DRAIN ENGINE COOLANT
2. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY
3. REMOVE FAN AND GENERATOR V BELT
4. REMOVE OIL COOLER PIPE
5. REMOVE TIMING BELT COVER SUB-ASSEMBLY NO.3 LH
6. REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the camshaft position sensor connector.
b. Remove the bolt, stud bolt and camshaft position sensor.
7. INSTALL CAMSHAFT POSITION SENSOR
a. Install the camshaft position sensor with the bolt and stud bolt.
Torque: 7.5 Nm (80 kgf.cm, 66 in.lbf)
8. INSTALL TIMING BELT COVER SUB-ASSEMBLY NO.3 LH
9. INSTALL OIL COOLER PIPE
10. INSTALL FAN AND GENERATOR V BELT
11. REFILL ENGINE COOLANT
12. CHECK FOR ENGINE COOLANT LEAKS
13. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY