Removal and Replacement

BACK DOOR STAY ASSEMBLY LH

REPLACEMENT

HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring addition information are included.
- Use the same procedures for the RH side and LH side.
- The procedures listed for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart.




1. REMOVE BACK DOOR STAY ASSEMBLY LH
a. Remove the 4 bolts and back door stay from the back door panel.

HINT: While supporting the back door by hand, remove the back door stay.

2. INSTALL BACK DOOR STAY ASSEMBLY LH
a. Install the back door stay with the 4 bolts.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)