Courtesy Lamp: Testing and Inspection

ROOM LAMP ASSEMBLY NO.1







a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to the terminal 1 and negative (-) lead to the terminal 2, then check that the lamp comes on when the switch is in the DOOR position.
c. Connect the positive (+) lead from the battery to the terminal 1 and negative (-) lead to the terminal 3, then check that the lamp comes on when the switch is in the ON position.

ROOM LAMP ASSEMBLY NO.2







a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to the terminal 1 and negative (-) lead to the terminal 2, then check that the lamp comes on when the switch is in the DOOR position.
c. Connect the positive (+) lead from the battery to the terminal 1 and negative (-) lead to the terminal 3, then check that the lamp comes on when the switch is in the ON position.

COURTESY LAMP ASSEMBLY




a. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, then check that the lamp comes on.