Fog/Driving Lamp: Service and Repair
FOG LAMP ASSEMBLY LHOVERHAUL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed for the LH side.
- Installation is in the reverse order of removal.
1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
2. REMOVE FOG LAMP PROTECTOR LH
a. Disengage the 2 claws, and remove the fog lamp protector RH.
3. REMOVE FOG LAMP ASSEMBLY LH
a. Disconnect the connector.
b. Disengage the 3 claws, and remove the fog lamp assembly LH.
4. REMOVE FOG LAMP BULB
a. Remove the fog lamp bulb as shown in the illustration.
5. REMOVE BEARING FOG LAMP
6. REMOVE FOG LAMP LAMP UNIT LH
7. VEHICLE PREPARATION FOR FOGLAMP AIM ADJUSTMENT
8. PREPARATION FOR FOGLAMP AIMING
9. FOGLAMP AIMING INSPECTION
10. FOGLAMP AIMING ADJUSTMENT