Tail Lamp: Service and Repair

REAR COMBINATION LAMP ASSEMBLY LH

OVERHAUL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE REAR COMBINATION LAMP SERVICE COVER LH




2. REMOVE REAR COMBINATION LAMP ASSEMBLY LH
a. Disconnect the connector.
b. Remove the 2 nuts and the rear combination lamp assembly LH.

3. REMOVE REAR COMBINATION LAMP LENS GASKET RH

4. REMOVE REAR COMBINATION LAMP BULB
a. Remove the rear combination lamp bulb and the socket and wire.
b. Remove the rear combination lamp bulb from the socket and wire.

5. REMOVE REAR COMBINATION LAMP SOCKET AND WIRE SUB-ASSEMBLY LH
6. REMOVE REAR COMBINATION LAMP LENS LH