Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of Control Module:
1. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR ECU)
a. Disconnect the P5 master switch connector.
b. Check the voltage or continuity of each terminal of the wire harness side connector.
If the result is not as specified, the wire harness side may malfunction.
1. Reconnect the P5 switch connector, and check the voltage of each terminal of the connector.
If the result is not as specified, the master switch may malfunction.
2. CHECK MULTIPLEX NETWORK BODY ECU
Terminals Of Control Module:
a. Disconnect the body ECU connectors B9, B10, B11 and B12.
b. Check the voltage or continuity of each terminal of the wire harness side connector.
If the result is not as specified, the wire harness side may malfunction.
c. Reconnect the ECU connectors, and check the voltage of each terminal of the connectors.
If the result is not as specified, the door ECU or communication line may malfunction.