P0724
DTC P0724 Brake Switch B Circuit HighDESCRIPTION
The purpose of this circuit is to prevent the engine from stalling while driving in lock-up condition when brakes are suddenly applied.
When the brake pedal is depressed, this switch sends a signals to the ECM. Then the ECM cancels the operation of the lock-up clutch while braking is in progress.
MONITOR DESCRIPTION
This DTC indicates that the stop light switch remains on. When the stop light switch remains ON during stop and go driving, the ECM interprets this as a fault in the stop light switch and the MIL comes on and the ECM stores the DTC. The vehicle must stop (less than 3 km/h (2 mph)) and go (30 km/h (19 mph) or more) 5 times for two driving cycles in order to detect a malfunction.
Monitor Strategy:
Typical Enabling Conditions:
Typical Malfunction Thresholds:
Wiring Diagram:
INSPECTION PROCEDURES
Step 1:
Steps 1(continued)-3:
Step 3(continued):
