Component Inspection

INSPECTION





1. INSPECT RELAY (Marking: FAN NO. 1, FAN NO. 3)
a. Check the resistance of the relay

Resistance:

If the result is not as specified, replace the relay





2. INSPECT RELAY (Marking: FAN NO. 2)
a. Check the resistance of the relay

Resistance:

If the result is not as specified, replace the relay.





3. INSPECT ECT SWITCH (NO. 1)
a. Check the resistance.

Resistance:

If the result is not as specified, replace the relay.

NOTICE: When checking the ECT switch in water, the terminals should be kept dry. After the check, dry the switch.





4. INSPECT ECT SWITCH (NO. 2)
a. Check the resistance.

Resistance:

If the result is not as specified, replace the relay.

NOTICE: When checking the ECT switch in water, the terminals should be kept dry. After the check, dry the switch.