Cylinder Head Assembly: Specifications

Cylinder Head Bolts
First Pass 54 Nm (550 kgf-cm, 40 ft. lbs.)
Final Pass 90°

Cylinder Head Surface Variation
Maximum Warpage
Cylinder block side 0.05 mm (0.0020 inch)
Intake manifold side 0.10 mm (0.0039 inch)
Exhaust manifold side 0.10 mm (0.0039 inch)





Intake Manifold Bolts & Nuts 15 Nm (153 kgf-cm, 11 ft. lbs.)








Camshaft Bearing Cap Bolts 16 Nm (163 kgf-cm, 12 ft. lbs.)

Camshaft Pulley Bolts 125 Nm (1,275 kgf-cm, 92 ft. lbs.)

Exhaust Manifold Nuts
First Pass 49 Nm (500 kgf-cm, 36 ft. lbs.)
Final Pass retighten nuts 1 & 2