Air Conditioning System (Manual A/C)
TERMINALS OF ECUTerminals Of Control Module/Pinouts:
1. AIR CONDITIONING AMPLIFIER ASSEMBLY
a. Disconnect the connectors from the A/C amplifier assembly and inspect the connector on the wire harness side, as shown the chart.
If the circuit is as specified, try to replace the A/C amplifier assembly with a new one. If the circuit is not as specified, inspect the circuits connected to other parts.
Terminals Of Control Module/Pinouts:
Terminals Of Control Module/Pinouts (Part 2):
b. Connect the connector to A/C amplifier assembly and inspect the wire harness side connector from the back side, as shown in the chart.