Active Test

ACTIVE TEST

Performing the ACTIVE TEST using the intelligent tester allows the meters, indicators and so on to operate without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten diagnostic time. It is possible to display the DATA LIST on the intelligent tester during the ACTIVE TEST.

a. Warm up the engine.
b. Turn the ignition switch off.
c. Connect the intelligent tester to the DLC3.
d. Turn the ignition switch to the ON position.
e. Turn the tester ON.
f. Enter following menus: DIAGNOSIS / OBD/MOBD / METER / ACTIVE TEST

Part 1:

Part 2:

g. Check the values by referring to the table