Data List

DATA LIST

HINT: Using the intelligent tester to read the DATA LIST allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non intrusive inspection can be very useful as intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.

a. Warm up the engine.
b. Turn the ignition switch off.
c. Connect the intelligent tester to the DLC3.
d. Turn the ignition switch to the ON position.
e. Turn the tester ON.
f. Enter following menus: DIAGNOSIS / OBD/MOBD / METER / DATA LIST

Part 1:

Part 2:

g. Check the values by referring to the table.