Hazard Warning Switch: Testing and Inspection
HAZARD WARNING SWITCHINSPECTION
1. INSPECT HAZARD WARNING SWITCH (W/O NAVIGATION SYSTEM)
a. Remove the A/C control assembly.
b. Measure the resistance according to the value(s) in the table.
If the result is not as specified, replace the A/C control assembly (hazard warning switch).
2. INSPECT HAZARD WARNING SWITCH (W/ NAVIGATION SYSTEM)
a. Remove the multi-display assembly.
b. Measure the resistance according to the value(s) in the table.
If the result is not as specified, replace the multidisplay assembly (hazard warning switch).