Variable Valve Timing Actuator Position Sensor: Service and Repair

VVT Sensor:

REMOVAL

HINT: A bolt without a torque specification is shown in the standard bolt chart.

1. REMOVE AIR CLEANER ASSEMBLY
2. REMOVE VVT SENSOR

a. Disconnect the sensor connector.
b. Remove the bolt and sensor.

INSTALLATION

1. INSTALL VVT SENSOR

a. Apply a light coat of engine oil to a new O-ring. Install the O-ring onto the sensor.
b. Install the sensor with the bolt.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

c. Connect the sensor connector.

2. INSTALL AIR CLEANER ASSEMBLY