Air Cleaner Housing: Testing and Inspection

INSPECTION

1. INSPECT AIR CLEANER CAP SUB-ASSEMBLY




a. Cover port C with your finger and blow air into port B. Check that air flows out of port A.
b. Cover port C with your finger and blow air into port A. Check that air does not flow out of port B.
c. Cover ports A and C with your fingers, and apply 60 kPa (450 mmHg, 18 in.Hg) of vacuum to port B. Check that there is no change in the vacuum after one minute.
If the result is not as specified, replace the air cleaner cap.