Pinout Values and Diagnostic Parameters

TERMINALS OF ECU

1. CHECK MULTIPLEX NETWORK BODY ECU







a. Disconnect the multiplex network body ECU connectors.
b. Check the voltage and resistance according to the value(s) in the table (wire harness side connector).

If the result is not as specified, there may be a malfunction on the wire harness side.
c. Reconnect the multiplex network body ECU connectors.




d. Check the voltage according to the value(s) in the table (ECU side connector).

If the result is not as specified, the multiplex network body ECU may have a malfunction.
(*1): When the answer back function is operated.