Component Inspection

INSPECTION





1. INSPECT RELAY (Marking: FAN NO. 1, FAN NO. 3)
a. Measure the resistance of the relay.

Resistance:

If the result is not as specified, replace the relay.





2. INSPECT RELAY (Marking: FAN NO. 2)
a. Measure the resistance of the relay.

Resistance:

If the result is not as specified, replace the relay.





3. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
a. Measure the resistance between terminals 1 and 2.

Resistance:

If the result is not as specified, replace the relay.

NOTICE: When checking the ECT sensor in the water, the terminals should be kept dry. After the check, dry the sensor.