Removal and Installation

REMOVAL

HINT:
- Using the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH




2. REMOVE FOG LIGHT PROTECTOR LH
a. Disengage the 2 claws, and remove the fog light protector RH.




3. REMOVE FOG LIGHT ASSEMBLY LH
a. Disconnect the connector.
b. Disengage the 3 claws, and remove the fog light assembly LH.

INSTALLATION




1. INSTALL FOG LIGHT ASSEMBLY LH
a. Install the fog light assembly LH.
b. Connect the connector.




2. INSTALL FOG LIGHT PROTECTOR LH
a. Install the fog light protector LH.

3. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH