Drive Belt: Service and Repair

DRIVE BELT

COMPONENTS:

REMOVAL
1. REMOVE FRONT WHEEL RH
2. REMOVE FRONT FENDER SPLASH SHIELD FRONT RH
3. REMOVE FRONT FENDER APRON SEAL RH
4. REMOVE ENGINE MOUNTING STAY NO. 2 RH
5. REMOVE ENGINE COVER SUB-ASSEMBLY NO. 1
6. REMOVE ENGINE MOVING CONTROL ROD W/BRACKET
7. REMOVE ENGINE MOUNTING BRACKET NO. 2 RH

8. REMOVE FAN AND GENERATOR V BELT
a. Slowly turn the belt tensioner clockwise for more than 3 seconds, and remove the drive belt by using SST.
SST 09843-18030

INSTALLATION

1. INSTALL FAN AND GENERATOR V BELT
a. Slowly turn the belt tensioner clockwise for more than 3 seconds, and install the drive belt by using SST.
SST 09249-63010
2. INSTALL ENGINE MOUNTING BRACKET NO. 2 RH
3. INSTALL ENGINE MOVING CONTROL ROD W/BRACKET
4. INSTALL ENGINE MOUNTING STAY NO. 2 RH
5. INSTALL FRONT FENDER APRON SEAL RH
6. INSTALL FRONT FENDER SPLASH SHIELD FRONT RH
7. INSTALL FRONT WHEEL RH