Manual Shifting Test
MANUAL SHIFTING TEST1. PERFORM MANUAL SHIFTING TEST
HINT:
- With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transaxle.
- If any abnormalities are found in the following test, the problem is in the transaxle itself.
a. Disconnect the transmission wire connector.
b. Inspect the manual driving operation.
Check that the shift and gear positions correspond to the table.
Check that the gear change corresponds to the shift position.
HINT: If the gear positions of the L, 2 and D are difficult to distinguish, do the following road test. Road Test
If any abnormality is found in the above test, the problem is in the transaxle itself.
c. Connect the transmission wire connector.
d. Clear the DTC. Clearing Trouble Codes