Blower Motor Switch: Service and Repair

REAR BLOWER SWITCH

REMOVAL




1. REMOVE DECK SIDE TRIM COVER FRONT
a. Using a thin flat-head screwdriver with the tip taped up with protective tape, disengage the 2 claw fittings and remove the deck side trim cover front.




2. REMOVE DECK SIDE TRIM COVER RH
a. Remove the bolt.
b. Release the 2 clip fittings and 2 claw fittings.
c. Remove the connector and deck side trim cover RH.




3. REMOVE REAR HEATER BLOWER SWITCH
a. Remove the 2 screws and rear heater blower switch.

INSTALLATION




1. INSTALL REAR HEATER BLOWER SWITCH
a. Install the rear heater blower switch and the 2 screws.




2. INSTALL DECK SIDE TRIM COVER RH
a. Reconnect the connector and install the deck side trim cover RH.
b. Engage the 2 clip fittings and 2 claw fittings.
c. Install the bolt.




3. INSTALL DECK SIDE TRIM COVER FRONT
a. Install the deck side trim cover front and engage the 2 claw fittings.