Overhaul
DISASSEMBLY1. REMOVE BUMPER MOULDING SET BOLT NO.1
a. Remove the 4 bumper moulding set bolts No.1.
2. REMOVE REAR BUMPER ENERGY ABSORBER
a. Remove the rear bumper energy absorber.
3. REMOVE REAR BUMPER BAR
a. Remove the rear bumper bar.
4. REMOVE REAR BUMPER BAR LH
a. Remove the rear bumper bar LH.
5. REMOVE REAR BUMPER BAR RH
6. REMOVE REAR BUMPER REINFORCEMENT NO.1
a. Remove the 6 nuts and rear bumper reinforcement No.1.
7. REMOVE REAR BUMPER SIDE RETAINER LH
a. Remove the 3 screws.
b. Disconnect the 4 claws and remove the rear bumper side retainer LH.
8. REMOVE REAR BUMPER SIDE RETAINER RH
REASSEMBLY
1. INSTALL REAR BUMPER SIDE RETAINER LH
a. Temporarily install the rear bumper side retainer LH with the claws.
b. Install the rear bumper side retainer LH with the 3 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
2. INSTALL REAR BUMPER SIDE RETAINER RH
3. INSTALL REAR BUMPER REINFORCEMENT NO.1
a. Install the rear bumper reinforcement No.1 with the 6 bolts.
Torque: 27 N.m (275 kgf.cm, 20 ft.lbf)
4. INSTALL REAR BUMPER BAR RH
5. INSTALL REAR BUMPER BAR LH
6. INSTALL REAR BUMPER BAR
7. INSTALL REAR BUMPER ENERGY ABSORBER
8. INSTALL BUMPER MOULDING SET BOLT NO.1