Maintenance Indicator Reset
Engine Oil Replacement Reminder Light
This light acts as a reminder to replace the engine oil.
This light will come on when the ignition key is turned to "ON" and will go off after about a few seconds.
When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 12 seconds with the ignition key turned to the "ON" position. If you continue driving without replacing the engine oil, and if the distance driven exceeds 8000 km(5000 miles), the light will come on. The light will remain on thereafter.
If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace it as soon as possible.
Resetting the system
The system must be reset after the engine oil replacement. Reset the system by the following procedure.
1. Turn the ignition key to the LOCK position with the odometer reading shown.
2. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. A message "MAINT REQD RESET MODE" will appear on the display.
3. Hold down the knob at least 5 seconds. A message "COMPLETE" will appear and a beep will sound.
Navigation Maintenance Item Data (If equipped)
This system has a function which informs you of the time to replace certain parts or components as well as other information shown on the screen. When the system begins operating after reaching either the information items date or driving distance, the "information" screen will be displayed.
To avoid seeing the "information" screen again, touch the "Do not display this message again" switch.
Setting Maintenance Information
1. Push the "INFO" button to display the "Information Menu" screen, and then touch the "Maintenance" switch.
2. Touch your desired icon
Delete All: To cancel all conditions which have been input.
Reset All: To reset the item which has satisfied a condition.
Touch the "OFF" switch at the top of the "Maintenance" screen to turn off the the information screen.
When your vehicle needs to be serviced, the icon color will change to orange.
When you touch the "Personal Items" switch on the "Maintenance" screen, the screen changes to the "Personal Event" screen. Touch the keys to input your desired name and then input the conditions.
3. Input the conditions.
Notice of Date: you can input the next maintenance date.
Notice of Distance: you can input the driving distance until the next maintenance check.
After you input the information, touch the "OK" switch. The screen returns to the "Maintenance" screen.
Note:
- For scheduled maintenance information, please refer to the Scheduled maintenance guide or Owners manual supplement.
- Depending on your driving or the road conditions, the system may have a time-lag between the data which has been input and the actual date and driving distance.