Exhaust Manifold

EXHAUST MANIFOLD SUB-ASSEMBLY RH




- Install a new gasket and the exhaust manifold RH with the 6 nuts. Using several steps, tighten the nuts uniformly in the sequence shown in the illustration.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
- Retighten nuts 1 and 2 shown in the illustration.


EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY NO.2





- Install the exhaust manifold converter No.2 with the 6 nuts and bolt. Using several steps, tighten the nuts uniformly in the sequence shown in the illustration.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
- Retighten nuts 1 and 2 shown in the illustration.