Repair Instruction - Customize Parameters
CUSTOMIZE PARAMETERSHINT: The given items can be customized.
NOTE:
- After confirming whether the items of the customer's request are applicable or not for the customized items, perform the customize operation.
- Be sure to record the current value before customizing.
- In case of performing the troubleshooting, pay attention as there is a possibility that the function is set to OFF by customizing.
(Example: In case of the symptom in which "The wireless operation does not function" is displayed, check that the wireless operation is not set to OFF by customizing, then perform the troubleshooting.)
1. AIR CONDITIONING SYSTEM
2. THEFT DETERRENT SYSTEM
3. LIGHTING SYSTEM
4. POWER DOOR LOCK CONTROL SYSTEM
Part 1:
Part 2:
5. WIRELESS DOOR LOCK CONTROL SYSTEM
6. METER / GAUGE SYSTEM
a. Parameter
Part 1:
Part 2:
b. Buzzer ON/OFF Setting
The buzzer ON/OFF setting, which is a setting of the buzzer function of the combination meter, can disable the driver side seat belt buzzer and front passenger side seat belt buzzer.
NOTE: Basically, these buzzers should be set on for safe driving. Perform the procedures only if it is necessary to set the buzzer off.
HINT: "SEAT BELT BUZZER OFF" indicates that the buzzer is OFF. "SEAT BELT BUZZER ON" indicates that the buzzer is ON. The buzzer ON/OFF setting will be finished (the odometer will display "ODO") if the ODO/TRIP switch is not operated for 10 seconds or more. In this case, perform step 11 to check that the buzzer ON/OFF setting is complete. If it is not complete, start from step 1 again.
NOTE: When either the battery cable or the combination meter connector is disconnected,these buzzers are set on.
c. TIME ZONE SETTING (w/ Navigation System)
Part 1:
Part 2:
7. SLIDING ROOF SYSTEM