Rear No. 1 Seat Assembly (For RH Side)
Rear No. 1 Seat Assembly (for RH Side)Rear No. 1 Seat Assembly (for RH Side):
Rear No. 1 Seat Assembly (for RH Side):
REMOVAL
1. REMOVE REAR NO. 1 SEAT ASSEMBLY
a. Fold the seatback down.
b. Unlock the seat lock, and swing the whole seat up and forward.
c. Using a screwdriver, remove the seat leg covers.
HINT: Tape the screwdriver tip before use.
d. Remove the 4 bolts and rear No. 1 seat.
Torque: 37 N.m (380 kgf.cm, 27 ft.lbf)
INSTALLATION
The installation procedures are the removal procedures in reverse order.