Power Mirror Switch: Testing and Inspection

INSPECT OUTER REAR VIEW MIRROR SWITCH ASSEMBLY







a. The L side of the left/right adjustment switch:
Check the continuity of the mirror switch.
If the continuity is not as specified, replace the switch.




b. The R side of the left/right adjustment switch:
Check the continuity of the mirror switch.
If the continuity is not as specified, replace the switch.







c. Check the mirror switch circuit.
1. Disconnect the connector from the switch and check the connector on the wire harness side.
If the circuit is not as specified, inspect the parts connected to the circuit.




d. Check the indicator light operation.
1. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 6, and check that the indicator light lights up.
If the indicator light does not light up, replace the switch.